[Product Name]: Self adhesive wound protector;

[Specification and Model]: Type I, II, III, IV

【 Main Structure Composition 】: Self adhesive wound protectors can be divided into four models according to different materials: Type I is made of spunlace non-woven fabric, absorbent core pad, and release paper; Made from spunlace non-woven fabric and release paper into type II; Made of transparent film tape, absorbent core pad, and release paper to form Type III; Made from transparent film tape and release paper to form type IV.

【 Product Performance 】: 1. The base fabric should have consistent color, uniform thickness, clean and flat surface, without any delamination, stains, impurities, damage, or leakage.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 2. Cut the edges neatly, place the absorbing core pad in the center position of the protective tape, with a tolerance of ± 5mm, and no natural peeling phenomenon.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 3. The base cloth should be evenly attached to the protective release paper, without flipping, curling, or overlapping edges& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp;

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 4. The release paper should be completely covered on the base cloth of the protective sticker, without any exposed base cloth or absorbent core pad.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 5. Stickiness: According to Chapter B.2 of Appendix B of YY/T 0148-2006, during the test in the oven, the top of the impermeable steel plate should not slide more than 2.5mm.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 6. Peel strength: When tested according to Chapter B.2 of Appendix B of YY/T 0148-2006, the average force required for pasting the tape every 1cm width should not be less than 1.0 N.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 7. The adhesive content of the base fabric: The adhesive content of the adhesive layer should be ≥ 35g/m2.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 8. Absorbent core pad water absorption: Its saturated water absorption ratio should be greater than 1:6.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 9. The protective tape should be sterile and have a sterile validity period of two years.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 10. The residual amount of ethylene oxide in protective stickers sterilized with ethylene oxide should not exceed 10 μ G/g.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 11. The protective patch should not be irritating to human skin.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 12. The patch should not cause delayed hypersensitivity reactions to human skin.

& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp& Nbsp; 13. The cytotoxicity of the protective patch should not exceed level 2.

[Scope of Application]: Used for skin application during surgical incisions and indwelling of arteriovenous catheters, as well as postoperative or traumatic wound application; Infant navel wound protection.

【 Instructions 】: Open the packaging and peel off the cover of the isolation paper attached to the incision.

【 Precautions 】: This product is only for one-time use and should be destroyed after use. This product has a shelf life of two years after being treated with epoxy B. Damaged packaging is strictly prohibited from use& Nbsp& Nbsp;

[Production date]: See the certificate of conformity or packaging seal.

[Production batch number]: See the certificate of conformity or packaging seal.

[Expiration Date]: See the certificate of conformity or packaging seal.

[Contraindications]: No findings yet

Storage: In a warehouse with a relative humidity not exceeding 80%, free from corrosive gases, clean, and well ventilated.

[product name]: self adhesive sound care

[Specifications] Type I, II, III, IV

[main structure composition]: self adhesive wound patch can be divided into four models according to different materials: spunlaced nonwoven, absorption pads, and off type paper made into I type; II type by launch nonwoven and off type paper system; III type by transparent film tape, absorption pad, off type paper, transparent film tape, The form paper is IV

[product performance]: 1. The base cloth should be uniform in color, uniform in thickness, clean and smooth in appearance, no degumming, stays, improvements, break and glue leakage

2. Trimming, absorption core pad placed in the middle of the protective pad, tolerance difference of+5mm, no natural shelving phenomenon

3. The base cloth should be attached to the protection of the type paper, without flanging, no curling and overlapping 4. The release paper should be fully covered on the base of the protective clothing, without the base cloth and the absorbing core mat

5. Sticky: according to chapter YY/T B.2 of appendix B of test 0148-2006, during the over test, the top of the steel plate should be slid below 2.5mm

6. Peel strength: according to chapter B.2 of appendix B of YY/T 0148-2006, the average force required for sticking tape should be less than 1 N per 1cm width

7. The amount of glue contained in the base cloth: the adhesive content of the adhesive layer should be more than 35g/m2

8. Absorption core pad water absorption: Its saturated water absorption ratio should be> 1: 6

9. The protective past should be alkaline and the alkaline period is two years

10. The ethylene oxide residue of ethylene oxide sterilized patch should not exceed 10 g/g

11. The protective past should not be irritating to the skin of the human body

12. There should be no delayed hypersensitivity to human skin

13. The cytotoxicity of the past should not be more than 2

[scope of application]: Apply for skin incision with surgical incision and infilling catalyst, and post operation or won surface application

[use method]: Open the package, tea off the isolation paper and stick it to the coverage of the decision

[note]: This product is restricted to one time use and destroyed after use& Nbsp; This product is valid for two years by epoxy B. The break of the packing is strictly prohibited

[Production date]: See the certificate or seal

[production batch number]: See the certificate or seal

Expiration date: See the certificate or seal

[contraindication]: no discovery for the time being

Storage: in a storage room without corrosive gas, clean and well utilized in a relative humidity of not more than 80%