Operating procedure of protective sheet for operating microscope:

1. Remove the protective cover and lens cap of the microscope

2. Relax the brake device on the base, fold each cross arm, tight theBrake handwheel and push it to the operating bed

3. Plug in the power socket, turn on the power supply, then turn on theMicroscope switch, check where the function is normal, the light can beOn

4. Wrap the lens and study of the microscope with alkaline transparentProtective sheath, then cover the lens with protective sheath on the objectiveLens, and try to fight it to prevent the light source from reflecting theLens Then hang the elastic bands on both sides of the protective lens to findThe two points reward

. 5. Cover the primary and secondary eyeglasses to be used, tea off theAdvantageous and fix the seat Put the other side away

6. Tighten the fusion with two waitbands on the mirror cover, tea offThe adhesive and fix it well

7. Place a microscope according to the operation site After satisfaction,Brake the base brake firmly and tight the brake wheels

8. At the beginning of the operation, assist the operator to adjust theLens to the functional position by twisting the black button on the arm TheLight source should be adjusted from the smallest brightness to the appropriateOne The focus of the objective lens should be adjusted according to the impulseDistance and the ruler of the eye, and then the focus of the objective lensShould be adjusted to achieve maximum claim

9. At the end of the operation, the initiator nurses turn off theMicroscope switch first, then draw the power supply, buck the lens cap,Cover the protective cover of the microscope, and range the position Notes:1. In the course of operation, if the surgical instrument meets the lens of theProtective cover, do not wipe the lens to prevent the impact of theTransparency of the lens 2. Microscope should prevent vibration and impact, fixThe operating room and avoid repeated movement Two people must operateSynchronously when the protective cover of a microscope is set, and theOperation manual for sterile articles shall be followed 3. After use, the lensSurface is regularly wired with graded cotton dipped in an alcoholic toKeep clean Cover the microscope with a protective cover to keep the opticalSystem clean