Intravenous infusion is a commonly used clinical treatment method. The infection monitoring institution of the Ministry of Health has conducted an epidemiological survey on the acceptance of intravenous infusion treatment among hospitalized patients. The results showed that on the day of the survey, the average proportion of hospitalized patients receiving intravenous infusion treatment in the surveyed hospitals was 73.53%, with a relatively high rate of 99.80%. As an interventional treatment method, intravenous infusion requires strict adherence to aseptic techniques and disinfection and isolation systems throughout the entire process from drug preparation to administration, otherwise it can easily lead to hospital infections.

The traditional methods for handling bottle caps include:

1. Place the bottle mouth directly exposed and disinfect it again before infusion before use.

2. Place a cotton swab or dry cotton ball on the bottle mouth after opening the intravenous liquid, and seal it with a piece of adhesive tape.

3. Before infusion, cover the bottle mouth with disinfectant (alcohol or iodine) cotton balls and apply a piece of adhesive tape externally to the prepared liquid.

The drawbacks of traditional bottle mouth treatment methods:

1. Adopting the method of exposed placement and disinfecting before infusion is cumbersome and costly according to actual calculations.

2. Using medical cotton swabs for sealing makes it difficult to achieve the effect of keeping the bottle mouth sterile.

3. The commonly used method of disinfecting the bottle mouth with alcohol or iodine cotton balls in clinical practice is relatively cumbersome and has poor fixation. The covering material is prone to fall off, which brings inconvenience to nursing work.

Medical bottle cap patch is a medical product used to cover the needle hole of the infusion bottle (bag) after adding liquid during intravenous infusion. It can be applied to the opening of the intravenous infusion bottle to prevent contamination of the bottle cap. It can effectively solve the problem of sterile sealing of opened bottle mouths in clinical practice, and prevent hospital infections caused by bottle mouth contamination during infusion. While simplifying operations, it can also significantly reduce operating costs, which has significant practical significance and value for patients, healthcare workers, and hospitals. Advantages:

1. Reduce the occurrence of hospital infections ： Cover the opening of the infusion bottle (bag) with a bottle cap sticker to effectively prevent hospital infections caused by interventional treatment. 2. Practical and fast ： The bottle cap sticker is used in conjunction with a fully automatic dispensing machine. By driving the shaft wheel, the sticker can be automatically peeled off from the carrier base belt, and spit out from the dispensing port. The doctor directly takes the sticker and covers it on the mouth of the infusion bottle (bag). The fully automatic tablet dispenser has functions such as counting, self disinfection, and selection of tablet dispensing methods, which simplifies clinical retrieval operations. While improving work efficiency, the intelligent control design of the fully automatic film production machine can also ensure the success rate of film extraction and reduce losses.

3. Safety, Economy, and Environmental Protection ：

1) The bottle cap sticker is non-toxic and non irritating to the skin and mucous membranes, and there will be no residual disinfectant on the bottle cap to prevent residual liquid from seeping into the infusion bottle and causing infection, reducing infusion reactions.

2) It can save various items such as cotton balls, disinfectant, adhesive tape, disinfection forceps, cotton ball cans, holding containers, foam forceps tubes, etc., simplifying cumbersome operation steps.

3) Easy to operate, firmly fixed and not easily detached, safe and reliable, no need to disinfect before use. Usage:

1. Turn on the fully automatic film production machine.

2. Take the boxed bottle cap sticker and place it in the fully automatic tablet dispenser as required.

3. Choose the appropriate dispensing method (manual/automatic) and pick up the patch.

4. Cover the liquid bottle mouth with the patch, apply slight pressure around it, and remove it directly when using.

Notes:

1. This product has been sterilized with ethylene oxide and is intended for one-time clinical use. It must be destroyed after use.

2. The product should be stored indoors in a well ventilated and dry environment, and should not be mixed with toxic, harmful, or corrosive substances